Shorty Ambient System

Shorty Schwalm System - Ambient Cure

The ASTM F2561 Compliant Shorty™ Liner system extends up the lateral pipe and provides a full-circle; one-piece structural connection with ASTM F3240 Compliant Insignia® hydrophilic compression gasket sealing. Recommended length of lateral is 5 feet maximum.

Air Compressor 70 CFM

Portable Boss Bullet II Rotary Screw Air Compressor, 70 cfm rated delivery, 20hp Honda 4-cycle engine, 100 psig operating pressure rating, single stage oil flooded rotary screw, 80-115 psig operating pressure range, oil to air cooling system. 43″L X 31″W X 35″H Weight 410 lbs. Equipped with 2 – 25 ft. 3/4″ air hoses.

Portable Ambient Air Reel System

Hose Reel with Rotary Fluid Passage, with high torque gear reduction pneumatic auto level wind. Fixed with 500’ of high-tensile 1/2″x1/2″ Dual Bonded Hose, all mounted on a pneumatic heavy duty cart.

Single Inversion Standard Rope Reel

Shorty T-Liner Layflat Launcher System for Use with Schwalm Robot

(2) 8 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
(2) 10 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
(2) 12 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)

LMK CIPP T-Liner Wet Out Trailer – 28 ft.

Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
Tool Box (mounted) with Universal Tool Kit
Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
Interior receptacles (Qty. 7)
Fold down aluminum wet out tables
Deep freezer (25 cubic feet)
Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
(2) Roof top air conditioners and heat strips (15 amp per unit)
PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
LMK EZ Jack
LMK Ramp Door Bridge
Flush mount floor tie downs (Qty. 10)
Matching spare tire (mounted)
Fire extinguisher, first aid kit, PPE kit and eye wash station
Storage shelf, marker board, markers and miscellaneous holders installed

Schwalm Robotics and Accessories

The robot will be supplied standard with the following items:
Air motor type 2025-P Serial-Nr.
Air motor type 2560-P Serial-Nr.
Side weights, Digital Box, four sets of axle extension sets 12″-24″
Lifting hook, hydraulic oil, hydraulic oil including a filling device; several tools; operator’s manual and transportation box
Main Cable Repair Kit
A high-resolution, tilt, focus camera with integrated LED lighting

Aluminum frame, emergency switch, digital footage counter on the front
Adjustable pulling strength of the cable, adjustable speed, automatic or manual control.
Includes a mounting bracket for the drum.
Power supply 115V 60 Hz or 220 Volts 50Hz.
Dimensions: Length 536mm; Width 350mm; Height 560mm. Weight 28kg
660 Foot cable

Air Motor Extension (4-inch) for 2560P Air Motor
Air Motor Extension (6-inch) for 2560P Air Motor
(2) Hydraulic Hose Short
(3) Bearings 618/8
(2) Bearings 61803 2Z
(1) Seal 17-26-6 BA
(2) Seal 45-58-7 BABSL
(4) Seal 30-47-7 BABSL
(1) Camera Cleaning Unit on Robot
(1) Air Hose for Cutting Motor
(1) Digital Motor for Tool Movement
Wings for Air Mortor 2025 1000 W
V-Belt for 2060
Test Box for 1330/2060 Robot

Training

License Fee per Territory (State), T-Liner
(4) Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
(4) Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
(1) Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
(2) Travel Mobilization Time / per Trainer -Within the Continental US