Shorty Steam System
- Home
- /Shorty Steam System
Shorty Schwalm System - Steam Cure
The ASTM F2561 Compliant Shorty™ Liner system extends up the lateral pipe and provides a full-circle; one-piece structural connection with ASTM F3240 Compliant Insignia® hydrophilic compression gasket sealing. Recommended length of lateral is 5 feet maximum.
LMK CIPP T-Liner Wet Out Trailer – 28 ft.
Trailer is complete with a 48″ side door, full ramp rear door, and 7,000 lb. axles. Trailer is wired with 50 AMP breaker box, (5) fluorescent ceiling lights, 7′ 6″ ceiling and 3-way switches. Powered by an 7-KW super quiet external fill gasoline fired generator. (Generator is mounted inside the trailer in protective box)
- Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
- Tool Box (mounted) with Universal Tool Kit
- Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
- Interior receptacles (Qty. 7)
- Fold down aluminum wet out tables
- Deep freezer (25 cubic feet)
- Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
- (2) Roof top air conditioners and heat strips (15 amp per unit)
- PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
- LMK EZ Jack
- LMK Ramp Door Bridge
- Flush mount floor tie downs (Qty. 10)
- Matching spare tire (mounted)
- Fire extinguisher, first aid kit, PPE kit and eye wash station
- Storage shelf, marker board, markers and miscellaneous holders installed
Steam Equipment – Mobile Steam Unit (Container on Trailer)
The LMK Mobile Steam Unit can be placed where you need it while not tying up a vehicle. The corrugated steel shipping container makes the ideal housing and contains everything needed to steam cure LMK’s T-Liner® Main-to-Lateral Connection Liners.
Steam unit includes all piping, electrical and equipment listed below mounted and completely ready for field use.
- Down Stream Reel 500′ of sleeved 1″ and ½” steam hose reel with rotary fluid passage, pneumatic auto level-rewind, and direct chain drive.
- 20-HP diesel fired steam boiler
- 12-KW Whisper-Watt diesel powered generator
- 250 CFM BOSS diesel powered screw air compressor
- Electric air cooling system
- Enclosed water resistant daylight viewable color monitor
- Manual rewind reel/500′ coax
- 400 gallon poly water tank
- Top roller/ Pneumatic bottom roller
- Self retracting air hose reel 1/4″ x 25′
- Manual Rewind Single Inversion Rope Reel with 600′ of 5/16″ Inversion Rope
- Electric 3,500 psi pressure washer hose and reel
- 12 (Qty) 24″ reflective traffic cones
- Fire extinguisher
- First Aid Kit
- Eye wash bottle
Winch Assembly
Winch Assembly, Electric, 115V with Remote Controller and 1000′ of 3/16″ SST Cable
Single Inversion Standard Rope Reel
Single Inversion Standard Rope Reel
Layflat Hose Assembly
- (2) 10′ Layflat Assembly for up to 5′ Liners
- (2) 25′ Layflat Assembly for up to 20′ Liners
- (2) 35′ Layflat Assembly for up to 30′ Liners
Steam Back Layflat Launcher
- Steam Back Layflat Launcher System for up to 5′ Liner Lengths. Includes Steam Back End Cone, Hose Barb, Hose and Cable, 4″ Layflat Hose, Female Camlock and D-Ring
- Steam Back Layflat Launcher System for up to 15′ Liner Lengths. Includes Steam Back End Cone, Hose Barb, Hose and Cable, 4″ Layflat Hose, Female Camlock and D-Ring
T-Launcher for use with 5-Line Equipment
- (2) 8 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
- (2) 10 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
Cleanout Equipment
- Push Plug, Cleanout, downstream, Steam “B” Station, with ½ inch flow-thru, for 4″ – 6″ diameter pipes, hose and regulator assembly
- Push Plug, Cleanout, upstream, non-flow thru, 3″ – 6″, with hose and regulator assembly
Layflat Hose Assembly Parts
- Schwalm Robot – Focus Camera
- The robot will be supplied standard with the following items:
- Air motor type 2025-P Serial-Nr.
- Air motor type 2560-P Serial-Nr.
- Side weights, Digital Box, four sets of axle extension sets 12″-24″
- Lifting hook, hydraulic oil, hydraulic oil including a filling device; several tools; operator’s manual and transportation box
- Main Cable Repair Kit
- A high-resolution, tilt, focus camera with integrated LED lighting
- Digital Control Unit 19″ Video System (To build into vehicle)
- Text generator and an electronical meter counter on screen (INCLUDES OSD Card)
- The unit controls all six functions of the robot.
- Has a proportional speed control. Power supply 120 V/60Hz and capacity approx. 1000 Watts. Weight 29 Kg.
- Vehicle mounted remote control unit for control of forward/backwards movement of the robot.
- Electrical cable drum RA200
- Aluminum frame, emergency switch, digital footage counter on the front
- Adjustable pulling strength of the cable, adjustable speed, automatic or manual control.
- Includes a mounting bracket for the drum
- Power supply 115V 60 Hz or 220 Volts 50Hz
- Twin Hose Drum Reel – top feed
- 500 feet of air and water hose. Includes camera cleaning unit
- (4) Carbide wheels (Per each) Large Robot
- (2) Piranha Milling Heads
- Cone shaped special mill for cutting all kinds of materials except steel
- Diameter 2.75 inches, Height 3 inches, Number of segments 30
- (2) Mushroom Shaped Milling Heads ($455.00 Each)
- Suitable for cutting all kinds of materials
- Diameter 3.8 inches, small version with diamonds. Number of segments 12
- (2) Wire Brush Heads
- Small Cup Form- 2.5″
- Air Motor Extension (4-inch) for 2560P Air Motor
- Air Motor Extension (6-inch) for 2560P Air Motor
- (2) Hydraulic Hose Short
- (3) Bearings 618/8
- (2) Bearings 61803 2Z
- (1) Seal 17-26-6 BA
- (2) Seal 45-58-7 BABSL
- (4) Seal 30-47-7 BABSL
- (1) Camera Cleaning Unit on Robot
- (1) Air Hose for Cutting Motor
- (1) Digital Motor for Tool Movement
- (1) Wings for Air Mortor 2025 1000 W
- (1) V-Belt for 2060
- (1) Test Box for 1330/2060 Robot
- Optional/Replacement Parts
- (2) Schwalm Puck Positioner for 8″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
- (2) Schwalm Puck Positioner for 10″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
- (2) Schwalm Puck Positioner for 12″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
- (2) Heavy Duty Laser Pointer (typically lasts for over 20 uses)
Training
- License Fee per Territory (State), T-Liner
- (4) Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
- (4) Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
- (1) Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
- (2) Travel Mobilization Time / per Trainer -Within the Continental US
